 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DISCRETE SEMICONDUCTORS DATA SHEET M3D744 PEMD12 NPN/PNP resistor-equipped transistors Product specification Supersedes data of 2001 Aug 30 2001 Nov 07 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors FEATURES * 300 mW total power dissipation * Very small 1.6 mm x 1.2 mm ultra thin package * Excellent coplanarity due to straight leads * Replaces two SC-75/SC-89 packaged transistors on same PCB area * Reduces required PCB area * Reduced pick and place costs. APPLICATIONS * General purpose switching and amplification * Inverter and interface circuits * Circuit driver. DESCRIPTION NPN/PNP resistor-equipped transistor in a SOT666 plastic package. TR1 handbook, halfpage PEMD12 QUICK REFERENCE DATA SYMBOL VCEO ICM R1 R2 PINNING PIN 1, 4 2, 5 6, 3 emitter base collector DESCRIPTION TR1; TR2 TR1; TR2 TR1; TR2 PARAMETER collector-emitter voltage peak collector current bias resistor bias resistor MAX. 50 100 47 47 UNIT V mA k k 6 5 4 R1 5 4 6 R2 TR2 MARKING TYPE NUMBER PEMD12 MARKING CODE D2 1 Top view 2 3 1 MAM448 R2 R1 2 3 Fig.1 Simplified outline (SOT666) and symbol. 2, 5 1, 4 MBK120 6, 3 Fig.2 Equivalent inverter symbol. 2001 Nov 07 2 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS - - - - - - - - - Tamb 25 C; notes 1 and 2 - -65 - -65 Tamb 25 C; note 1 - MIN. PEMD12 MAX. UNIT Per transistor for the PNP transistor with negative polarity VCBO VCEO VEBO VI collector-base voltage collector-emitter voltage emitter-base voltage input voltage TR1 positive negative input voltage TR2 positive negative Io ICM Ptot Tstg Tj Tamb Per device Ptot Notes 1. Transistor mounted on an FR4 printed-circuit board. 2. The only recommended soldering is reflow soldering. THERMAL CHARACTERISTICS SYMBOL Rth j-a Notes 1. Transistor mounted on an FR4 printed-circuit board. 2. The only recommended soldering is reflow soldering. PARAMETER thermal resistance from junction to ambient CONDITIONS notes 1 and 2 VALUE 416 UNIT K/W total power dissipation 300 mW output current (DC) peak collector current total power dissipation storage temperature junction temperature operating ambient temperature +10 -40 100 100 200 +150 150 +150 V V mA mA mW C C C +40 -10 V V open emitter open base open collector 50 50 10 V V V 2001 Nov 07 3 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. - - - - 80 - - 3 33 0.8 IE = ie = 0; VCB = 10 V; f = 1 MHz TYP. - - - - - - 1.2 1.6 47 1 PEMD12 MAX. UNIT Per transistor for the PNP transistor with negative polarity ICBO ICEO IEBO hFE VCEsat Vi(off) Vi(on) R1 R2 ------R1 Cc collector-base cut-off current collector-emitter cut-off current emitter-base cut-off current DC current gain saturation voltage input off voltage input on voltage input resistor resistor ratio collector capacitance TR1 (NPN) TR2 (PNP) VCB = 50 V; IE = 0 VCE = 50 V; IB = 0 VCE = 30 V; IB = 0; Tj = 150 C VEB = 5 V; IC = 0 VCE = 5 V; IC = 5 mA IC = 10 mA; IB = 0.5 mA VCE = 5 V; IC = 100 A VCE = 0.3 V; IC = 2 mA 100 1 50 90 - 150 0.8 - 61 1.2 mV V V k nA A A A - - - - 2.5 3 pF pF 2001 Nov 07 4 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors PEMD12 103 handbook, halfpage hFE (1) (2) MLD716 10-1 handbook, halfpage VCEsat (V) (1) (2) (3) MLD715 102 (3) 10 1 10-1 1 10 IC (mA) 102 10-2 -1 10 1 10 IC (mA) 102 TR1 (NPN); VCE = 5 V. (1) Tamb = 150 C. (2) Tamb = 25 C. (3) Tamb = -40 C. TR1 (NPN); IC/IB = 20. (1) Tamb = 100 C. (2) Tamb = 25 C. (3) Tamb = -40 C. Fig.3 DC current gain as a function of collector current; typical values. Fig.4 Collector-emitter saturation voltage as a function of collector current; typical values. handbook, halfpage 10 MLD718 102 handbook, halfpage Vi(on) MLD717 Vi(off) (V) (V) 10 (1) 1 (2) (2) (3) (1) 1 (3) 10-1 10-2 10-1 1 IC (mA) 10 10-1 10-1 1 10 IC (mA) 102 TR1 (NPN); VCE = 5 V. (1) Tamb = -40 C. (2) Tamb = 25 C. (3) Tamb = 100 C. TR1 (NPN); VCE = 0.3 V. (1) Tamb = -40 C. (2) Tamb = 25 C. (3) Tamb = 100 C. Fig.5 Input-off voltage as a function of collector current; typical values. Fig.6 Input-on voltage as a function of collector current; typical values. 2001 Nov 07 5 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors PEMD12 103 handbook, halfpage hFE (2) (1) MLD720 -10-1 handbook, halfpage VCEsat (V) MLD719 102 (3) (1) (2) (3) 10 1 -10-1 -1 -10 IC (mA) -102 -10-2 -1 -10 -1 -10 IC (mA) -102 TR2 (PNP); VCE = -5 V. (1) Tamb = 150 C. (2) Tamb = 25 C. (3) Tamb = -40 C. TR2 (PNP); IC/IB = 20. (1) Tamb = 100 C. (2) Tamb = 25 C. (3) Tamb = -40 C. Fig.7 DC current gain as a function of collector current; typical values. Fig.8 Collector-emitter saturation voltage as a function of collector current; typical values. handbook, halfpage -10 MLD722 -102 handbook, halfpage Vi(on) MLD721 Vi(off) (V) (1) (V) -10 -1 (2) (2) (3) (1) -1 (3) -10-1 -10-2 -10-1 -1 IC (mA) -10 -10-1 -10-1 -1 -10 IC (mA) -102 TR2 (PNP); VCE = -5 V. (1) Tamb = -40 C. (2) Tamb = 25 C. (3) Tamb = 100 C. TR2 (PNP); VCE = -0.3 V. (1) Tamb = -40 C. (2) Tamb = 25 C. (3) Tamb = 100 C. Fig.9 Input-off voltage as a function of collector current; typical values. Fig.10 Input-on voltage as a function of collector current; typical values. 2001 Nov 07 6 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors PACKAGE OUTLINE Plastic surface mounted package; 6 leads PEMD12 SOT666 D A E X S YS HE 6 5 4 pin 1 index A 1 e1 e 2 bp 3 wMA Lp detail X c 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 0.6 0.5 bp 0.27 0.17 c 0.18 0.08 D 1.7 1.5 E 1.3 1.1 e 1.0 e1 0.5 HE 1.7 1.5 Lp 0.3 0.1 w 0.1 y 0.1 OUTLINE VERSION SOT666 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 01-01-04 01-08-27 2001 Nov 07 7 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS PEMD12 This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Preliminary data Qualification Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2001 Nov 07 8 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors NOTES PEMD12 2001 Nov 07 9 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors NOTES PEMD12 2001 Nov 07 10 Philips Semiconductors Product specification NPN/PNP resistor-equipped transistors NOTES PEMD12 2001 Nov 07 11 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. (c) Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/02/pp12 Date of release: 2001 Nov 07 Document order number: 9397 750 09045 |
Price & Availability of PEMD12
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |